[ HULL COATINGS (BOTTOM BLACKING) | PRIMERS AND SURFACE PREPARATION | TOP COATS & ENGINE BAY | MAINLINE HOME PAGE ]

MAINLINE
Building Products Limited
2 Sefton Road, Litherland, Liverpool, L21 7PG
Tel: 0151 920 6451 Fax:0151 920 6452

Suppliers and Distributors of specialist hull coatings for narrow boat construction and refurbishment.

TOP COATS
Coloured Solution (with rust inhibitor) Smooth high gloss finish
High performance, traditional coatings with good gloss retention which are easy to apply. Suitable for internal and external use on cabin sides and tops. Does not require undercoats or primers but can be used with Fast Drying Primer and Five Star Primer where added corrosion protection is required.
A non standard colour range is available on request.
STANDARD GREEN L.T BRUNSWICK GREEN GRASS GREEN DARK GREEN
STANDARD RED ALUMINIUM BLACK SIGNAL RED
STANDARD GREY LIGHT GREY BATTLESHIP GREY GOLDEN YELLOW
ARCTIC BLUE DARK BLUE WHITE BEAVER

Colour samples are approximations only
Coverage: 10 sq.m. per litre
Drying Time: Touch Dry 2 hours.Hard Dry 8 hours.

Hammered Finish One coat protection
A one coat, tough corrosion protection that gives a metallic hammered appearance. Can be brushed over large areas. No primer or undercoat is required.
BLACK SILVER GREY LIGHT BLUE
WHITE DARK BLUE MID GREEN RED
Coverage: 8 sq.m. per litre
Touch dry: 2-3 hours Hard Dry: 8 hours

ENGINE BAY PAINT
A single pack coating that will give resistance to oil and diesel. Two coat application is recommended.
For improved anti-corrosion on bare metal Five Star Primer is recommended as a pre-treatment.
Coverage Rate: 15 sq.m per litre
Drying time: Touch dry 1 hour.
fully cured 48 hours
Colour: Red, Green, Grey
[ HULL COATINGS (BOTTOM BLACKING) | PRIMERS AND SURFACE PREPARATION | TOP COATS & ENGINE BAY | MAINLINE HOME PAGE]